 |
ition Information
PRODUCT DESCRIPTION:
Metal Mask is a single component polyurethane coating that makes any metal
surface look exactly like new bare metal. Metal Mask is non-porous and will
not crack, chip, or peel when properly applied. It has great scratch and
abrasion resistance and is not
sensitive to UV light. Follow directions carefully and you will be rewarded
with the best protective coating for metal available anywhere!
DIRECTIONS FOR USE:
Wash the part to be painted with Marine Clean to remove grease, wax, oil, or silicone. Apply Metal Ready to etch the surface. If it is a new part, Metal Mask can be applied directly to the surface. If it is an old rusted part, I suggest using POR-15 Rust Preventive paint first, then applying Metal Mask as a top coat. This will insure the best protection possible.
Stir contents of can well, then apply Metal Mask with a foam brush. Try to avoid painting back and forth.
Apply in thin, covering coats, using single, steady strokes to avoid flooding your job with too much paint, which could cause it to run and streak.
Continue to stir Metal Mask so that metallic pigments remain in solution as you paint. Allow 3 or 4 days for Metal Mask to reach maximum hardness.
Spray Application:
Use 25 - 30 lbs(170-210Kpa). pressure for normal gloss. Use only POR-15 Solvent for thinning.
Precautions: Avoid skin contact. Remove from skin at once to avoid temporary staining. Use of protective gloves and ventilating equipment is recommended.
NOTE: Organic vapor particulate respirators, NIOSH/MSHA approved, must be used when spraying Metal
Mask in a well-ventilated area. When spraying in an enclosed area, air-supplied respirator must be used.
Moisture will shorten the life of unused Metal Mask. Seal can immediately after using. Keep out of reach of children. Harmful or fatal if swallowed. Use in well-ventilated areas only.
Cleanup: Varsol or Gun wash.
Hazardous
ingredients: Oil modi. ed polyurethane, Cas:
Proprietary, Aliphatic hydrocarbon, Cas#64741-41-9, Aluminum, Cas#7429-90-5,
Manganese Oxide, Cas#1313-13-9, Iron Oxide, Cas#1309-37-1, Silicon Dioxide,
Cas#7631-86-9, Aluminum Dioxide, Cas#1344-28-1
Information
contained herein is to our knowledge true and accurate, but all
recommen-dations or suggestions are made without guarantee. Since the
conditions of its use are beyond our control, RestoMotive
Laboratories/POR-15, Inc. disclaims any liability incurred in connection
with the use of its products and information contained herein. No
person is authorized or empowered to make any statement or recommendation
not contained herein, and any such statement or recommendation so made shall
not bind the Corporation. Furthermore, nothing contained herein shall be
construed as a recommendation to use any product in con. ict with existing
patents covering any material or its use, and no license implied or in fact
is granted herein under the claims of any patents.