Hardnose Paints are glossy, rock-hard topcoats designed for spray or brush application over all painted or unpainted surfaces, including highly polished aluminum and chrome surfaces. Hardnose Paints will dry in less than 1 hour, but will take 3 or 4 days to reach maximum hardness. When Hardnose Paint is first dry to the touch, it will appear to be very soft. Avoid touching it for several days until it becomes hard and tough. Accidental contact could damage the surface before full cure has taken place.

Like many other POR-15 coatings, Hardnose Paint is a moisture-cured coating, which means it is strengthened by exposure to moisture. It won't crack, chip, peel, or yellow, and is flexible as well.

 
Hardnose Paint is available in these beautiful colors:
 

 

 

 

 

Dark Gray

Black

Light Gray

Beige

 

 

 

 

Brown

Bright Red

Violet

Dark Green

 

 

 

 

Light Yellow

Light Green

Orange

Light Blue

 

 

 

 

 Dark Yellow

Dark Blue

Red

 Whitecote

Note: These colors may vary depending on your monitor's settings.

Note: If Hardnose Paint is to be put directly onto bare aluminum or other reactive metals like zinc, copper, or brass, use POR-15's AP 120 METAL PREP on the bare metal surface first. This will insure perfect adhesion of Hardnose Paint to those metals.

 Note: Always mix 1 part Hardener-Activator with 4 parts Hardnose Paint

HARDNOSE APPLICATION INSTRUCTIONS


 

Back